Tamagotchi-007
Well-known member
- Joined
- Jul 8, 2006
- Messages
- 60
- Reaction score
- 0
ok ive read most of the 'decorating tamas' topics and found that most of them use nail polish,and that is all they have.SO i've decided to give more ideas on decorating tamas!!
i remade this topic as i had more ideas
**``[SIZE=14pt]Key Rings[/SIZE]``**
what u need:
♣ string
♣ beads
♣ any little charms
♣ scissors
what to do:
1.cut the string at desired length.
2.string the beads in a way that u like
3.put the little charm at the end and tie a knot.
4.Attach it to the silver 'O' on the side of the tamagotchi.
5.Tada!! u have a cute little charm for ur tamagotchi!!!
**'' [SIZE=14pt]Stickers[/SIZE] ''**
i heard stickers are wonderful to put on ur tama especially on the back so why not try it without any nailpolish
i tried the nailpolish and it took the paint away from my tama so do not use it
**'' [SIZE=14pt]Lanyards[/SIZE] ''***
it isn't decorating but it is decorating the lanyard that hlds your tamagotchi!
what u need:
♣ a plain thick or thin lanyard
♣ string and needle OR/AND texta/paint anything like that.
♣ news paper
♣ paintbrush (if ur using paint)
what to do ( if you are using paint):
1. spread newspaper on the ground or on the table.
2. spread lanyard on newspaper
3. get your paint and your paint brush
4. paint any design you like on your lanyard.
5. flip it over, do the same design or do a different design.
6. hang it somewhere like a on a door knob to dry
7. when it's dry attach it to your tamagotchi
8. Tada you have a customised lanyard by YOU!!!
**'' a container for your tamagothci ''**
if u have a version 2 or version 1 read this:
what you need:
♣ clay (any colour you want)
♣ pva glue
♣ your tamagotchi
♣ newspaper
♣ paintbrush
what to do:
1.spread the newspaper on the ground.
2. get a ball of clay the size of your palm and around 2.5 - 3.0 cm thick.
3. get your tamagotchi and squich it into the clay to get the basic shape.(don't worry nothing will happen to your tamagothci)
4.Take your tamagothci out.
5.Let the clay to dry over night
6.when the clay is dry get your paintbrush.
7.paint the clay model with a light coat of pva glue(this will make it shiny and it makes it not damage your tamagothci.
8.when the glue dry's up put your tamagothci in and enjoy!!
**'' a container for your tamagotchi ''**
if you have a version 3 read this:
there's nothing much to it.Just get the container which your tamagotchi came in take out the plastic model & use that!!
** MORE COMING SOON **
tell me if they r good ideas!!!!
tama-007
cyaa [:
i remade this topic as i had more ideas
**``[SIZE=14pt]Key Rings[/SIZE]``**
what u need:
♣ string
♣ beads
♣ any little charms
♣ scissors
what to do:
1.cut the string at desired length.
2.string the beads in a way that u like
3.put the little charm at the end and tie a knot.
4.Attach it to the silver 'O' on the side of the tamagotchi.
5.Tada!! u have a cute little charm for ur tamagotchi!!!
**'' [SIZE=14pt]Stickers[/SIZE] ''**
i heard stickers are wonderful to put on ur tama especially on the back so why not try it without any nailpolish
i tried the nailpolish and it took the paint away from my tama so do not use it
**'' [SIZE=14pt]Lanyards[/SIZE] ''***
it isn't decorating but it is decorating the lanyard that hlds your tamagotchi!
what u need:
♣ a plain thick or thin lanyard
♣ string and needle OR/AND texta/paint anything like that.
♣ news paper
♣ paintbrush (if ur using paint)
what to do ( if you are using paint):
1. spread newspaper on the ground or on the table.
2. spread lanyard on newspaper
3. get your paint and your paint brush
4. paint any design you like on your lanyard.
5. flip it over, do the same design or do a different design.
6. hang it somewhere like a on a door knob to dry
7. when it's dry attach it to your tamagotchi
8. Tada you have a customised lanyard by YOU!!!
**'' a container for your tamagothci ''**
if u have a version 2 or version 1 read this:
what you need:
♣ clay (any colour you want)
♣ pva glue
♣ your tamagotchi
♣ newspaper
♣ paintbrush
what to do:
1.spread the newspaper on the ground.
2. get a ball of clay the size of your palm and around 2.5 - 3.0 cm thick.
3. get your tamagotchi and squich it into the clay to get the basic shape.(don't worry nothing will happen to your tamagothci)
4.Take your tamagothci out.
5.Let the clay to dry over night
6.when the clay is dry get your paintbrush.
7.paint the clay model with a light coat of pva glue(this will make it shiny and it makes it not damage your tamagothci.
8.when the glue dry's up put your tamagothci in and enjoy!!
**'' a container for your tamagotchi ''**
if you have a version 3 read this:
there's nothing much to it.Just get the container which your tamagotchi came in take out the plastic model & use that!!
** MORE COMING SOON **
tell me if they r good ideas!!!!
tama-007
cyaa [:
Last edited by a moderator:
[/SIZE]
