**Tamagotchi Frozen**

Shop deals on ebay
Advertise with us
shop deals on amazon
TamaTalk

Help Support TamaTalk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
C

Chammetchi

New member
Joined
Sep 30, 2010
Messages
4
Reaction score
0
Please help me! I don't know what happened to my tamagotchi.

It is completely frozen in my time screen. I have a version 4 tamagotchi.

My B button is not working. So if someone knows how to unfreeze my tamagotchi, please reply. :(

 
First, get a pen, Then, poke the reset button. If the reset button is all messed up and torn, unscrew the battery case, take out the battery, and put it back in. Remember to select download!

 
Aha, I've experienced this too. This is a result of one of the following things:

:( Getting dropped on the floor

:( Water spilling on it

:( Loose screws (believe it or not, you may have to open up your Tama and fix up the screws on the circuit board)

:( Just being old

:( Sand/dust getting into it

I constantly have the same problem with my V6. I just take the battery out and put it in again. WARNING: IF YOU DO THIS TOO MANY TIMES, THE TAMA MAY RESET ITSELF.

I also recommend leaving it in the fridge overnight. It doesn't break it, but it can sometimes help.

 
Retired Tamaholic said:
Aha, I've experienced this too. This is a result of one of the following things:

:( Getting dropped on the floor

:( Water spilling on it

:( Loose screws (believe it or not, you may have to open up your Tama and fix up the screws on the circuit board)

:( Just being old

:( Sand/dust getting into it

I constantly have the same problem with my V6. I just take the battery out and put it in again. WARNING: IF YOU DO THIS TOO MANY TIMES, THE TAMA MAY RESET ITSELF.

I also recommend leaving it in the fridge overnight. It doesn't break it, but it can sometimes help.
Click to expand...
 
also what people overlook is that it might be fake if it is on ebay then it probably is! saying this once i purchased a fake tama v5 from toys r us

 
kuchitama001 said:
ER... tama dude that does not work if dropped in water cause normally its for binning but i got lucky
Click to expand...
Oh water! Right.

*I am not responsible for any harm done to your Tama*

Try getting into the Tama and hairdrying it. It might dry the water but If anything goes wrong its not my fault. Plus Its not been tested so IDK if it works...

 
maybe your battery is low, maybe you accidentally leaved it somewhere where water can spill on it. but you could reset it and then select the (reset back to life button) then it will maybe work if really not, it may be the result of old tama-go. well i tried to unscrew the back of my tama-go,then some sand went out of it. then i got a new battery. it really works.. :) but i hope you'll have your question solved. :)

 
maybe your battery is low, maybe you accidentally leaved it somewhere where water can spill on it. but you could reset it and then select the (reset back to life button) then it will maybe work if really not, it may be the result of old tama-go. well i tried to unscrew the back of my tama-go,then some sand went out of it. then i got a new battery. it really works.. :) but i hope you'll have your question solved. :)

 
once at the pool i accidentally got my v5 wet so i know what to do.

1.take the battery out ASAP!

2.keep the back off and put your tamagotchi screen-down in a place away from the sun.

3.leave it there for about a week.

4.after a week put in a NEW battery and try it out!

NOTE: the screen will look a little bit crimpled and you will lose all your memory!

hope i helped!

 
Status
Not open for further replies.

Latest posts

Back
Top