tamagotchi p1 button promblem
- Thread starter dylan1234
- Start date
Help Support TamaTalk:
- Status
I'd guess there's something wrong with the contact.
If you have a set of the correct screw drivers, I'd open the Tama up and check where the buttons touch the circuit board to make sure it's nice and clean. If that doesn't solve it, and you're sure that the button is pressing down correctly, then there's something wrong with the circuit board and the button is basically toast D:
If you have a set of the correct screw drivers, I'd open the Tama up and check where the buttons touch the circuit board to make sure it's nice and clean. If that doesn't solve it, and you're sure that the button is pressing down correctly, then there's something wrong with the circuit board and the button is basically toast D:
webster04
Well-known member
Use some contact cleaner on the circuit board and the buttons, had to do this with my used p1 tama and it fixed the problem.
Eternal Mametchi Fan
Well-known member
Ah, my P2 is like that...I'm not sure if it's normal, but the buttons are REALLY hard to press. I have to have long fingernails to press them properly, but you might want to try with something like a pencil.
- Status
