Posted 13 August 2013 - 10:06 AM
This is the only tama I have
Malfoy Edit: Merged posts. You can edit your posts up to 24 hours - please refrain from posting consecutively.
Posted 13 August 2013 - 10:31 AM
Posted 13 August 2013 - 11:27 AM
For removal, either tweezers or removing the shell. I would use Cutterbee long nose tweezers for removing since they go that far down, if you are careful.
Posted 13 August 2013 - 05:19 PM
I didnt use glue but duct tape and the tape keeps coming off the foam idk
Posted 13 August 2013 - 07:23 PM
Tape isn't going to hold foam down very well. You could try using something like a blunt toothpick to push the buttons until you can get a new tama or even just buy a broken one and replace the buttons. It's not very hard to replace buttons as long as you are careful and maybe get someone to help you.
Posted 13 August 2013 - 07:50 PM
If you have another tamagotchi that's broken, you could take it's buttons out and replace your Music Star's buttons.
Posted 13 August 2013 - 08:15 PM
You can still try the foam, but it would need to be thick/tall enough to still push on the sensors. If you only have regular foam, tape around the edges with the duct tape cut to size. Place them into the hole area. To keep them from falling out, carefully tape over the buttons 100%, new duct tape and lay it as flat as possible and cutting off the stuff that is hanging off the shell to have it fit.
If they aren't stickers, then it is the matter of placment and getting creative on holding them in. Usually, the stickers will hold each other enough to not need to be taped around.
Posted 15 August 2013 - 03:30 AM