Horsegirl 37
Well-known member
- Joined
- Jan 22, 2006
- Messages
- 79
- Reaction score
- 0
How do you debug a v2? 
^_^
^_^ 
How do you debug a V2?
- Thread starter Horsegirl 37
- Start date
Help Support TamaTalk:
- Status
peeweebird_123
Well-known member
Same for debugging V3. Okay, so take a screwdriver and pull out the screw on back of your Tama. Now you'll need a really tiny screwdriver to pull out the four screws, under that first layer.
Here be careful that you don't mess up your Tama. See a half-circle that says 'Debug'? Good. Rub it 10 to 20 times with a pencil. Then screw everything back in.
If this helped, now you can pick out your own character!
Here be careful that you don't mess up your Tama. See a half-circle that says 'Debug'? Good. Rub it 10 to 20 times with a pencil. Then screw everything back in.
If this helped, now you can pick out your own character!
mbT
Active member
I hear debugging causes problems for SOME people, but im not going to tell you what to do .
.hannahpinkchic
Member
- Joined
- Apr 1, 2006
- Messages
- 18
- Reaction score
- 0
Horsegirl 37
Well-known member
- Joined
- Jan 22, 2006
- Messages
- 79
- Reaction score
- 0
thanx! can some one put a link to a site that tells you how to do it so if i forget, I wont make another post?
Last edited by a moderator:
- Status
