Debbuged?
- Thread starter sweetama
- Start date
Help Support TamaTalk:
- Status
jeremy clarkson
Well-known member
I can't do mine. it doesn't have a debug circle.
Tamacool
Well-known member
To debugg ur tama, look on 'tips and tricks'
If its not on that page, search 'debugg' on the search thingy at the bottom
PS. If i were u, I wouldn't debugg ur tama, sometimes it can mess up ur whole tamagotchi!
If its not on that page, search 'debugg' on the search thingy at the bottom
PS. If i were u, I wouldn't debugg ur tama, sometimes it can mess up ur whole tamagotchi!
MimitchiRocks
Well-known member
Well, I've never done it, but I've attempted. Then I always chicken out. But I know how to do it.
First, make sure that the type you have is a ConneCTion, not a ConneXion. Connexions don't have debug circles. If you have an American Connection, then read on!
First, open up your Tamagotchi as if you were going to replace the battery. DON'T take it out, though. Now, do you see those four little screws in the corners? Unscrew those. It takes a very clever screwdriver to do that.
Is the battery still in it? Good. Tape it in place. Now, do you see a little circle to the bottom left corner of the battery? It should say "Debug" on top of it. (If there is no debug circle, you probably have a Connexion or minor sight problems. It's OK, you can try again some other time.) Take a pencil and scratch that circle, which is actually two semicircles. This should make a lead between the semicircles. Turn over your Tama. It should have the Download/Reset screen on it. Select "Reset". Don't worry if you hatch an egg and choose a name. Use button A (the left one) to scroll through the characters. If it seems normal and you can't scroll through the characters or anything, then turn the Tama over AGAIN and keep scratching at the debug circle with that pencil! It should work, but beware: Debugged Tama's poop A LOT.
First, make sure that the type you have is a ConneCTion, not a ConneXion. Connexions don't have debug circles. If you have an American Connection, then read on!
First, open up your Tamagotchi as if you were going to replace the battery. DON'T take it out, though. Now, do you see those four little screws in the corners? Unscrew those. It takes a very clever screwdriver to do that.
Is the battery still in it? Good. Tape it in place. Now, do you see a little circle to the bottom left corner of the battery? It should say "Debug" on top of it. (If there is no debug circle, you probably have a Connexion or minor sight problems. It's OK, you can try again some other time.) Take a pencil and scratch that circle, which is actually two semicircles. This should make a lead between the semicircles. Turn over your Tama. It should have the Download/Reset screen on it. Select "Reset". Don't worry if you hatch an egg and choose a name. Use button A (the left one) to scroll through the characters. If it seems normal and you can't scroll through the characters or anything, then turn the Tama over AGAIN and keep scratching at the debug circle with that pencil! It should work, but beware: Debugged Tama's poop A LOT.
Afterglw
Well-known member
Here is the best site to go to, it has photos and detailed instructions!
https://tamalove.pixelmood.com/tamagotchi_c...n_debugging.htm
https://tamalove.pixelmood.com/tamagotchi_c...n_debugging.htm
Tamagotchi93
Well-known member
I JUST CAN'T FIND THAT SCREWDRIVER!
Afterglw
Well-known member
They're at walmart or a hardware store. You'll need a size #0 phillips.
Tamagotchi93
Well-known member
Next time my dad goes to one I will come too. and look 4 it.
tamakitten
Well-known member
- Joined
- Feb 17, 2005
- Messages
- 1,279
- Reaction score
- 0
My brother Debugged my Tamagotchi and his,and it's kind of cool but I think ROM Testing is better.
- Status
