This topic is now closed to further replies.
This post is about vintage, connections and up to uratama. About how to repair them.
My native language isn't English, so this might be a bit of a strange read. 😋
If you have a pet that have lazy buttons or fading screen, or maybe doesn't seem to work at all, there is a thing you can do.
You can open up your device, it's easy! Take out all the screws, but remember where they are supposed to sit! Then you can take the screen off. It's No worries! And of it's broken - take the chance to fix it! It's no problem!
Then after you have taken off everything, you clean everything on the circuit board. Careful! With alcohol or some other ok liquid for cleaning electronic stuff. You do this with a cotton wad stick, like those for the ears... But don't use a used one! Don't be cheap, take a new one. It's worth it.
Then if something is wrong the paper behind the screen on your Tamagotchi, like water damage maybe? Then you can throw away and make a new one! Draw something naughty and put it where the old paper was and TADA! New background.
Make sure to clean the buttons and where they push! Press them a bit insideout and clean.
Well, after everything is clean, you put it together!!! Remember where the screws went??? I hope so. They have different sizes you know. But don't worry - you did! Yay! It wasn't hard at all and there wasn't many of them!
When the little critter is put back together, you put the batteries in and try it out. The screen will be stronger now and the buttons a lot bettet!
But if it still does NOT work it might have something else wrong. You might need to solder. That is a bit more advanced.
You'll need to change the 47uf capacitor! I'll write how... It's the funny round things with legs. You need to get it out! Cut it out of the circuit board and make sure EVERY part of it is out. Ok? Then you take your new 47uf capacitor and put it in it's place! Make sure it sits the right way! And you solder that capacitator into place!
But some pets use different capacitators, so get the right uf. Ok? There are different volt in capacitators but Tamas use very little.
Soldering isn't so hard. Save your Tamagotchi!
(If it's just your sound wires, then you can hot glue them.)
Anyway... I hope this wicked post helps a Tamagotchi breeder... Somewhere.
A take apart video!!! Notice the screen. Clean it!
Look! A Good guide for yr EYEs! (This guy knows Tamagotchi!)
Good Luck! 🧐
So, in addition to my old tamagotchis, I also had an original digimon. I never got as into it as I did my tama, but I haven't been able to found it as I've scrounged around my house during my return to the fandom. Just curious if there are other digivice fans out there among the tamagotchi fandom, and if so, what do you guys consider the best ones? I've seen a lot of people singing praises of the Burst (IG burst?) but it seems those are either only in Japanese or ludicrously expensive.
But yeah, either way, what have I missed in the last 20 years?
My series, Kitty and friends, or T.A.O.K.A.F, is a book series I wrote back in 2014. It talks about Kitty and her sister Lily going on adventures in Kitty City. That is it.
"Kitty, follow meeeee!" Lily screamed. She and Kitty were at the mall, and the area they were in was the food court. "OK!" Kitty screamed back. Kitty sometimes thought Lily was annoying, but the two were good friends. Lily ran to the giant flower in the play area, and Kitty got ready to cringe. Lily started climbing on the flower, and Kitty just had to close her eyes. Lily's underwear was showing, and she was making a scene. Kitty really hated it when she did that.