Help!

TamaTalk

Help Support TamaTalk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

GotchiV3

Well-known member
Joined
Mar 8, 2006
Messages
450
Reaction score
1
Every time I go to E-Tamago,when I go to Buildings the Tama just stays there!For Example,when a Tama goes to a Building it just stays at the Entrance not going inside. What gives?

 
Before anyone asks, e-tamago is a Japanese version of TamaTown. It's all in Japanese, and only Japanese Tamagotchis can go there.

Now, to answer your question, you may see three different problems, if you have a slow connection to the e-tamago server in Japan. When I am in North America I often see #1 and #2, and rarely #3. When I am in Japan, I rarely see #1, and almost never see #2 or #3. If your Tamagotchi character gets to the entrance of a building and can't go in nor can go back, you're having problem #2.

#1. While you are navigating between pages, you may see a blinking picture of Mametchi driving a blue race car. This screen means "please wait a moment". Usually, after a moment, either the new page will finish loading, or one of the below two problems will occur.

#2. If your tamagotchi character gets "stuck" between locations within e-tamago, hit your browser's Refresh button (or the F5 key if you're using Microsoft Internet Explorer). This will take you back to the login password entry page. Re-enter the same login password, then immediately go to whichever location you got stuck going to before.

#3. When you are navigating between pages, your progress may halt at a picture of Mametchi, Memetchi, and Kuchipatchi stuck in space between Earth and the Tamagotchi home planet. This screen occurs when there is a load error. There are two buttons above the Earth. The red button means "retry". The blue button means "stop". If you press stop, you will be taken back to the first page (before the login screen).

 
Status
Not open for further replies.

Latest posts

Back
Top