If you want to make a little bed for your Tamagotchi,you'll need:
Strong,not-so-old cardboard
Tape
Thread and yarn
Markers
Extra Paper
Glue
Scizzors
First,tape the cardboard together like a box in a smaller version.If there is any extra cardboard,cut it off from the edges.Cut the paper into the same shape and size of the box's outsides.Tape the paper onto the right sides.If you have some stickers you want to use,stick them on to decorate.Use markers to decorate,too.After decorating,put glue at the bottom of the box.Put the yarn and thread at the bottom.If glue still shows up,put more yarn or thread in.Let it dry.Approx. 4 hours or less.Put your Tamagotchi in when the lights are out.Tadaa!There you have a Gotchi Bed!
Here's another project:
The Tamagotchi Holder!For this project,you will need:
Air Drying Clay
Tamagotchi Figures
Your Tamagotchi
Mold the air drying clay into a ball,big enough for your Tamagotchi to fit.Put your Tamagotchi onto the clay.Press the Tama into the clay.(Note:This won't harm your Tamagotchi.)
Take your Tama out until you have a complete space to fit your Tamagotchi.While the clay is still moist,stick the Tama Figurines in,without moving the clay out of shape.Let the clay dry.Tadaa!There is your TamaGotchi Holder!
Please reply if you liked this project!
Bye-bye! 
Strong,not-so-old cardboard
Tape
Thread and yarn
Markers
Extra Paper
Glue
Scizzors
First,tape the cardboard together like a box in a smaller version.If there is any extra cardboard,cut it off from the edges.Cut the paper into the same shape and size of the box's outsides.Tape the paper onto the right sides.If you have some stickers you want to use,stick them on to decorate.Use markers to decorate,too.After decorating,put glue at the bottom of the box.Put the yarn and thread at the bottom.If glue still shows up,put more yarn or thread in.Let it dry.Approx. 4 hours or less.Put your Tamagotchi in when the lights are out.Tadaa!There you have a Gotchi Bed!
Here's another project:
The Tamagotchi Holder!For this project,you will need:
Air Drying Clay
Tamagotchi Figures
Your Tamagotchi
Mold the air drying clay into a ball,big enough for your Tamagotchi to fit.Put your Tamagotchi onto the clay.Press the Tama into the clay.(Note:This won't harm your Tamagotchi.)
Take your Tama out until you have a complete space to fit your Tamagotchi.While the clay is still moist,stick the Tama Figurines in,without moving the clay out of shape.Let the clay dry.Tadaa!There is your TamaGotchi Holder!
Please reply if you liked this project!
Bye-bye! 
