WATS DEBUG and how do i do it?

[cahila]

plz can some1 explaine to me what debuging is and how i do it?

thz

 

[cerros123]

De-bugging is basicly cheating...You can chose the first character you want and it has hyperspeed time(10secs=6hrs)

To do it you have to take your tama apart and click debug.(DO NOT DO IT ON V3!!!!!!!)

Hope i have helped,

BRIAN

 

[Tama Whatever]

To debug you have to take off the first screw and then you'll see 4 small screws on each corner. Unscrew those and pull the 2 pieces of your tama apart.

You'll see all the circuits and stuff. near the bottom you should see a circle that says DEBUG above it.

Take a wood pencil and rub that area a lot with the tip. put your tama back together and if you did it right, you should see an egg that seems to be moving VERY fast. If not, try again.

Trust me! this works on all 3 versions of tamas! ^_^

 

[alaqua]

i would just like to add that debugging cannot be done on connexions. any other time such as ' connections' are ok

 

[cahila]

QUICK QUESTION

the battery keeps falling out when i do this.

does it have to be in when i rub the JP3 debug?

YO FRIEND

cahila