I debugged And It Wurked! Here's How (i was on my v3.)
How do I debug?
Debugging is really dangerous to your Tamagotchi because it might ruin your Tamagotchi if done improperly, so DO THIS AT YOUR OWN RISK.I really suggest that you don't do this but it is your choice if you do it. I just give information out to the people who want it.
Supplies needed: your Tamagotchi, a small screwdriver, and a regular pencil
First step: Turn your Tamagotchi over, to where the back of the Tamagotchi is facing you.Unscrew the lid , to where the battery is.
Second step: Take out the battery and unscrew the four screws with a screwdriver that is the right size.Open your Tamagotchi when all screws are taken out.DON'T LOSE THE SCREWS.
Third step: Once open, put the battery in to where it regularly stays and tape over it so the battery would stay on. NOTE: at the bottom left corner where the battery is, it says debug. Remember where it is.
Fourth step: Now take your pencil, and rub(or scratch) the circle under the word debug.GENTLY scratch it several times for about 8 times.
Fifth step: Turn your Tamagotchi back around and be sure the battery don't fall out. Press the reset button and reset your Tamagotchi, when it ask download or reset.If you debugged correctly, you should be able to go through the characters with the 'A' button.
Sixth step: Now screw your Tamagotchi back together with the battery in place.
Final step: Explore your debugged Tamagotchi!!!!
Note: If your Tamagotchi is still normal, just go back and rub, the place you rubbed before, again. When it is debugged and everything is in place, simply go through the characters with the 'A' button. And when you found the Tamagotchi you want to raise, press the 'B' button to choose it. In a debugged Tamagotchi, the 'C' button speeds your Tamagotchi up, but it will stop when your Tamagotchi uses the toilet and is hungry and ect... Once you dealed with its hunger or it is done with the toilet and so on, you can press the 'C' button again to make your Tamagotchi speed up.